Ten years ago we set out to become the best high speed wireless integrator and Var to Var distributor in the world. I believe we’re on the right track. If you decide to give us a try, let me know how you think we’re doing.

-Peter Schoon, Founder and Pres.

---

FastE / GigE Free-Space Optics & 60-80GHz RF Links

#1 experienced Link source in the world. Certified by all 7 major manufacturers

 

Canon CanoBeam DT-130

 

Overview

Benefits of the DT-130
The flagship of the Canobeam line is the DT-130, an ultra-high-speed model that achieves transmission speeds of up to 1.25 Gbps, for supporting Gigabit Ethernet networks. The DT-130 has a modular SFP slot capable of supporting SX and LX media. Transmission distance is up to 1000m, and the DT-130 also incorporates a 3R Function (Re-shaping, Re-Timing and Re-generating), allowing the data signal to be relayed without loss of strength or quality. Affordably priced without compromise, the DT-130's Auto Tracking allows transmission at 1000m in only 500m visibility conditions. Modular SFP slot capable of supporting multimode or singlemode fiber-optic cable.

Lower Cost Installation than Fiber Optic Cable
Typically, a Canobeam network can be installed for much lower costs than fiber optic cable, since construction is avoided. Also, operating costs are limited to electricity and simple, routine maintenance.

Highly Secure and Reliable
Canobeam technology provides a highly secure and reliable link which has been proven at college and corporate campuses, government and military facilities and other applications where telecom copper bandwidth is insufficient, fiber is cost prohibitive or logistically impossible, or a redundant/disaster recovery system is essential.

Optimized Optical Performance
Nineteen years of free space optics (FSO) engineering expertise, and their established reputation as an advanced technology leader, is your assurance that Canon has the "know how" to design a sophisticated optical beam system that are optimally engineered for use in data transmission equipment.

Management Capabilities Via SNMP, Telnet and FTP
With a DT-MNG100, Management Board built-in as a standard feature, the status of the transceivers can be managed via SNMP (for monitoring) or Telnet (for monitoring and sending). Also diagnostic logs can be stored in a PC via FTP (for log data transmission).

3R Function (Re-Shaping, Re-Timing, Re-Generating)
The 3R function with the DT-130 can be used to normalize the signal waveform with Gigabit Ethernet transmissions, in order to permit relay transmissions without deterioration of signal quality between buildings that are more than 1 km apart of that do not provide a good line of sight.

Features

• New Small-Form-Pluggable (SFP) slot (SFP module has LC Connector per SFP Specification)
  
• State-of-art data transmission at 1.25Gbps for Gigabit Ethernet network
  
• Transmission distance from 20m to 1000m
  
• 3R Function (Re-shaping, Re-timing, Re-generating)
  
• Auto Tracking Feature
  
• DT-MNG100, Management Board built-in
  
• Affordably priced without compromise
  

   

Specifications

DT-100 Series	DT-110	DT-120	DT-130
Standard Transmission Distance*	20~500m	100~2000m	20~1000m
Data Transmission Speed	25~156Mbps	25~156Mbps	1.25Gbps
Transmission Device	Laser Diode	Laser Diode	Laser Diode
Laser Wavelength	785± 15nm	785± 15nm	785± 15nm
Laser Output Power	Approx. 7mW	Approx. 11mW	Approx. 11mW
Safety Class of Laser	Class 1M	Class 1M	Class 1M
Receiving Device	Si PIN-PD	Si APD	Si APD
Auto Tracking Adjustment	Yes (Horizontal: ± 1.2º Vertical:± 1.2º)	Yes (Horizontal: ± 1.2º Vertical:± 1.2º)	Yes (Horizontal: ± 1.2º Vertical:± 1.2º)
3R Function	-	-	Yes
Media Interface	SFP Slot x1	SFP Slot x1	SFP Slot x1
Operation Temperature Range	-20ºC~+50ºC	-20ºC~+50ºC	-20ºC~+50ºC
Power	AC100-240V 50/60Hz (DC-48V optional- Please contact a Canon office for more information)	AC100-240V 50/60Hz (DC-48V optional- Please contact a Canon office for more information)	AC100-240V 50/60Hz (DC-48V optional- Please contact a Canon office for more information)
Power Consumption	Approx. 20W	Approx. 20W	Approx. 20W
Installation Environment	Indoor or outdoor (Weatherproof : IP56)	Indoor or outdoor (Weatherproof : IP56)	Indoor or outdoor (Weatherproof : IP56)
Dimensions	246(W)x168(H) x487(D)mm	246(W)x168(H) x487(D)mm	246(W)x168(H) x487(D)mm
Weight	Approx. 8 Kg	Approx. 8 Kg	Approx. 8 Kg

*Longer transmission distances can be achieved but this is a function of weather conditions and acceptable link availability.

 

	USA	Europe
Electrical	UL60950(CSA60950)	EN60950
Laser Safety	21 CFR1040 (FDA Laser Notice No.50)	IEC60825-1 IEC60825-2
EMC	FCC-Part 15 (ICES-003)	EN55022 EN55024

QuickQuote>>